SAN FRANCISCO — Are you remodeling your kitchen? If so, you probably want to upgrade your lighting fixtures and appliances. However, if you live in an older home, there’s one thing you may be forgetting: your electrical panel. If your panel isn’t up to code, you’ll need to upgrade it—otherwise, it may not be able to handle the power needs of your newly remodeled kitchen.
The extent to which panel upgrades are needed can depend in part on the age of your home. For example, if it was built in the early 20th century and still has knob-and-tube wiring, you’ll need to replace its old fuse box with a modern breaker panel. This will make your electrical system safer, improve its performance and lower your home insurance costs.
Here are a few other factors to consider for upgrading your electrical panel:
Clearances
As per the National Electrical Code (NEC), a breaker panel must be situated a specified distance from things like the ceiling and HVAC equipment. Additionally, it can’t be enclosed in a closet or have anything blocking it (like garbage cans, for example). These rules are designed to prevent potential hazards and ensure ample accessibility to the panel when needed.
Arc protection
An arc fault can be caused by loose or corroded wires, which can generate heat that potentially leads to an electrical fire. As of 2014, the NEC requires that all electrical panel breakers be equipped with arc fault protection.
Sub-panel
In some cases, a kitchen remodeling project may involve the installation of a sub-panel—a smaller service panel that functions as an offshoot of the main panel. Sub-panels are often used to provide more convenient access to breakers or in cases where the main panel doesn’t have room to install additional breakers.
Due to the important role electricity plays in kitchen remodeling, it’s wise to get an electrician involved early in your project. For one thing, you’ll get a clear idea of how much work will be needed, which will help you determine your budget. Also, your electrician will be able to work with your designer and contractor to ensure you get exactly what you’re looking for in your remodeled kitchen.

Discover essential tips and expert advice for seamless electrical upgrades during your kitchen remodel. Ensure safety and efficiency with our guide.

Electrical Upgrades for a Kitchen Remodel by Miro Bokaric

Electrical Upgrades for a Kitchen Remodel

3 Things to Look for in a Moving Company

An Unintended Consequence of Extended Oil Change Intervals

How to Assess a Scratch on Your Vehicle

How to Prevent Soap Scum in Your Shower

Video: Assessing a Scratch on Your Vehicle

Video: Considering Electrical With Remodeling

Video: Preventing Soap Scum in the Shower

Video: The Problem With New Oil Change Intervals

Video: Things to Look For in a Mover

Video: Upgrading Your Electrical Panel


one of the most important home upgrades
you can invest in is bringing your
electrical panel up to current standards
today we're in San Francisco with
diamond certified expert contributor
Mirabeau Harvick of BV electric to learn
more the case that you have new kitchen
you're planning to build the brand new
kitchen you wanted to have a nice
state-of-the-art
21st century lighting in your house and
oops your house is actually old 1920s
and 30s and has old wiring existing
wiring old black knob and tube wiring
the best way for you is to get
electrician of course and what we could
do is like check make sure that your
electrical panel is up to current
standards or up to code in case you have
an old fuse box definitely replace it to
a breaker box also insurance will be
lower your electric equipment in your
house will be safe and whole house will
be protected 21st century and focus to
service it's like this one let's say you
upgraded your service to 200 amp service
you require two-inch conduit number two
at wiring which is more details later
your panel has to be a certain height
there's a limitations on the ceiling on
your header also you have to have a
clearance in front of that panel you
cannot put garbage cans or any kind of
equipment or make it in a closet
you cannot enclose your panel it has to
be exposed in any case for an emergency
so then you could disconnect the breaker
turn off the power and safely call the
fire department or electrician to fix
the problem the best thing is that in
case you have a breaker box like this
focus to idea that
breakers have a dots which they are like
protection more protection for you
so these breakers itself have points
that arc fault
in case of any kind of arc or any kind
of fluctuation of power these breakers
trip that means they're no more power no
more danger you're free of to call
electrician back in case you have
multiple breakers like this focus the
idea that these breakers are reason
because you have multiple wiring in the
system and they share in neutral which
is more detailed later the idea that you
have a sub panel which is a big breaker
two pole that's because you have a niche
additional sub panel in the house which
is closer to your location where you're
going to be kitchen remodel in case you
planning to do bathroom remodel and you
have no space in your panel same thing
focus the idea that you're gonna have to
do sub panel or upgrade your old fuse
box thank you
to learn more from local top rated
companies visit our diamond certified
expert reports at experts diamond
certified org


Video: When to Call an Electrician


even if you're an avid do-it-yourselfer
when it comes to electrical repairs it's
always best to leave the job to a
professional
today we're in San Francisco with
diamond certified expert contributor
Miravalle Couric of beauty electric to
learn why let's say you have a problem
with your electrical in your house
you're sitting there watching TV all of
a sudden all of the lights are
flickering your TV is losing power
your refrigerator doesn't work you have
a strange flickering in the bathroom the
best thing is to call electrician first
available and make sure that you guys do
not try to do by yourself
focus to the idea that electrical could
kill you
could hurt you or could make more heart
problems in case that you get shot so
the the best thing is that since we
electricians we have testers we have the
equipment so we could physically reach
to those enclosed spaces open the
panel's open the meter sockets and focus
the idea that breaker box is life so we
know which part we could test it which
part we could disconnect it without
damaging your equipment in your house in
case that the PG&E problem is the wiring
outdoor which is most of the time from
the weather and wind and they are like
some truck came by and rip the wires
then definitely still call the
electrician make sure the electrician is
testing the electrical wiring on the
main source which is on the top of the
building and again focus to idea that
you do not try to fix it neither like
try to test this because those wires
could have a big electrical impact and
you could get electrocuted yourself or
even kill yourself so
do not do this at home by yourself focus
with the electrical contractors or
experts who knows what exactly it could
be could happen in case you disconnect
something or correctly incorrectly
remove some wires in that case you could
maybe only electrocute the damage your
equipment that would be the best thing
for you to get the electrician on the
site make sure he record everything and
try to help you out the best way to do
to learn more from local top rated
companies visit our diamond certified
expert reports at experts diamond
certified org


Why DIY Electrical Work is a Bad Idea

Miro Bokaric: Driven to Succeed

Companies Rated Highest in Quality and Helpful Expertise

BV Electric Inc.

BV Electric Inc.

Diamond Certified Video Reports on BV Electric Inc.

Related for

Expert Articles

Expert Videos