Few things have greater long term bearing on your health and comfort than your indoor air quality system. Even in a culture obsessed with healthy living through diet and exercise, the purity of indoor air we breathe is often neglected. Because people typically spend more time at home than in any other single location, it is always worth the investment to ensure that your indoor air quality and climate control system is serving your needs every day.
However, every home environment, due to varying sizes and ages, brings its own specific set of climate control features and issues. Add to this that air quality is not visibly detectable, and most ductwork and climate control systems are hidden, and you’ll find that the process of achieving satisfactory indoor air quality is complex and mysterious to most consumers. Fortunately, a qualified Solano County indoor air quality contractor can assess the needs of your home and offer an array of modifications or installations to ensure that the air in your home is as clean and comfortable as possible. How do you find the right contractor for the job? You can start by doing your own basic assessment of your home and your needs.
Rate the Air Quality and Identify Air Quality Deficiencies in Your Home
Air quality contractors in Solano County address a great range of home air quality problems, but these problems fall into three basic categories: comfort, health, and energy efficiency. If your existing air quality system does not serve all of these areas to your satisfaction, you need not suffer through sub-par home air quality, and in the case of a toxic home environment, it may be downright dangerous to neglect the problem. Your first task, therefore, is to rate your system’s effectiveness in these three areas, and identify which you wish to improve.
Indoor Air Comfort in Solano County
The most common service that air quality contractors provide is improving the comfort of a home environment. Few things affect the enjoyment of one’s living environment as dramatically as temperature, humidity, and purity. It’s hard to put a price tag on the comfort and well being provided by such air quality upgrades. If your current heating or air conditioning system does not deliver maximum comfort, you need not resign yourself to a subpar home environment. There are several basic and cost effective steps you can take.
Improving Temperature Distribution
Industry studies routinely demonstrate that half of all homes contain rooms that are too hot or cold relative to the rest of the house, and basements are often 15 degrees cooler than the upstairs. Seasonal humidity or dryness also greatly affect the comfort of one’s home. Fortunately, these problems can all be identified and remedied with energy efficient, long term solutions that eliminate variations in temperature, even in the rooms are far from the climate control unit.
A common culprit in uneven heating or cooling is a leaky or inefficient duct system. The Department of Energy states that a typical duct system loses 25-40% of the furnace, heat pump, or air conditioning unit’s energy output. This rate of inefficiency not only impairs comfort, but also has a dramatic effect on a utility bill. Fortunately, if your home has uneven heating or cooling, a licensed Solano County air quality contractor can test and locate any duct leaks using an Infiltrometer.
An Infiltrometer is a device created by the Department of Energy that tests how airtight your house is and identifies air leaks by creating a 15 MPH wind on all sides of your home. Essentially, it is like a leak MRI for your home. It only takes about an hour, and once leaks are pinpointed, they can be sealed using fiber-reinforced elastomeric sealants. This quick solution pays for itself by lowering utility bills, and provides the added benefit of evening temperature distribution throughout the house.
A second remedy for improving temperature distribution is adding return air vents. A central heating or air conditioning system utilizes two different kinds of vents to circulate air through each room: supply vents and return vents. The supply vents supply a room with air heated or cooled to the desired temperature, while the return vents take air from the room and heat or cool it to the desired temperature, after which it is passed through the ducts back into the room.
A room with a supply vent but no return does not allow adequate circulation, but rather causes pressure to build, cutting down on the amount of air that can get into the room, and pushing more air into other parts of the house. This creates a secondary problem, causing the heat or air conditioning system to shut off by creating a build-up of hot or cool air in only one part of the house, before less ventilated areas have been heated or cooled to a comfortable level.
A third common cause of uneven temperature distribution is lack of proper insulation and the presence of thermal bypasses. Most homes have at least one area that does not have enough insulation to properly maintain the temperature of the room. This is especially prevalent in rooms near attics and garages. An Infiltrometer test will identify these low insulation areas as well, along with any gaps between walls, known as thermal bypasses. Thermal bypasses must also be sealed to avoid persistent loss of temperature stability.
Comfort: Improving Humidity Control
A second area that has a dramatic effect on air quality and comfort is the level of humidity, or alternatively dryness, depending on the season or climate. In areas of high humidity the most practical, cost effective solution is to reduce the number of moisture sources in the home. This calls for covering up any dirt floors, capping sump pump pits, checking for air leaks in basement walls, and installing better exhaust fans in bathrooms. Second, humidity levels can be improved using many of the same techniques contractors employ for improving temperature distribution—namely, improving the air tightness of a home, since during spring, summer, and fall in some areas, outdoor air is the biggest source of high humidity. This includes sealing any air leaks in walls, especially near garages and attics, and installing an appropriately sized air conditioning unit that will not shut down before dehumidification is complete. You may also consider installing an air conditioning unit with enhanced dehumidification features like humidity sensors, which wrings more moisture out of the air before shutting off. In extreme, high humidity areas, you may even remedy the problem by installing a high capacity ducted dehumidifier, which supplements the air conditioning unit by removing humidity from within the ductwork, then draining condensed moisture.
Alternatively, during the winter, or in especially dry areas, a humidifier can provide added comfort by infusing a desired amount of moisture into the air. Humidification systems come as freestanding, single room units or as central units installed and distributed via your HVAC system. Such units have the added benefit, in winter, of reducing heating costs, as humid air retains heat better than dry air. Your Solano County air quality contractor will be familiar with both the common problems and available solutions in Solano County, and help direct you to an HVAC system that takes into account factors like climate, season, and personal preferences.
Indoor Air Safety
While many prospective air quality customers call on contractors to help solve issues of comfort, which are the most easily detectable air quality issues, many of them discover that poor ventilation or humidity control over the long run can adversely affect one’s health, and sometimes pose serious consequences. Insulation, pets, furnishings, the type of heating, the outdoor environment, and the occupant’s lifestyle all have a bearing on the safety of indoor air quality. But just as comfort can be dramatically improved through a variety of HVAC renovations, so can the safety of one’s home environment be improved. Your licensed Solano County air quality contractor will provide you with all the options you need to ensure that the air you breathe every day is as clean and safe as possible for you and your family.
Installing Electronic Air Purification Systems in Solano County Homes
The purity of your indoor environment depends on many factors, including outdoor air, humidity, the presence of pets and smokers, and proximity to major thoroughfares and garages. One of the best ways to ensure that the air you breathe is healthy and safe is installing an air purification system. Unlike a filtration system, which simply traps airborne particles, a purification system uses ultraviolet light or electrical charge to actually clean the air, removing irritants, contaminants, viruses, mold, and other elements down to 0.01 microns in size.
In such a system, larger particles are first removed through filtration, then smaller particles are irradiated or electrically charged, which eliminates them from the air or “magnetizes” them to a purification plate, from which they are removed through periodic cleaning. This kind of system can also help your HVAC system function more efficiently, as it removes airborne debris and particles before they can clog up your ductwork. Ask your Solano County air quality contractor about the options and special environmental considerations relevant to your particular home environment.
Eliminating Contaminated Air Infiltration
One of the most common ways air quality is compromised is through air leaks. Contrary to popular belief, only 20% of a home’s air leaks result from windows and doors. 80% of all leaks come from improperly sealed garages, attics, crawlspaces, and basements, and chances are, the air that comes into a home through such leaks is not fresh outdoor air, but rather air contaminated by carbon monoxide, insulation fibers, mold spores, or radon gas. Ones again, an Infiltrometer test will precisely locate these leaks, and allow your Solano County air quality contractor to assess the best way to eliminate them.
Another common culprit for contaminated air is recessed can lighting. These ceiling fixtures provide dirt, dust, and insulation fibers with a gateway into the living environment. A qualified air quality contractor can inspect and seal or repair many light leaks. Attic openings pose a similar problem, but can be sealed through similar means as well.
Improving Pressure Balance, Mechanical Ventilation, and Air Filtration in Solano County
Pressure imbalances come from a lack of ventilation or air return mechanisms in rooms that are closed off from the rest of the house, or from unduly large exhaust fans and leaking ducts. The result is air pressure that is lower inside a room or section of the house than it is outside, which causes impure air to be sucked through air leaks in attics, garages, and basements. Such pressure balances can also backdraft appliances, leading to carbon monoxide leaks. Indoor home air pressure that is slightly higher than outdoor air pressure is optimal, as it prevents contaminated air from flowing in through leaks or porous materials.
New homes, by contrast, may be excessively air tight, preventing adequate circulation of fresh air. This issue can be remedied through improved mechanical ventilation that can range from powerful exhaust fans that remove moisture and odors to more complex and energy efficient units. One example is an energy-recovering ventilator, which preheats and cools incoming air using the indoor air that it exhausts. A ventilating dehumidifier is a second option, filtering, dehumidifying, and injecting outside air for improved circulation.
A final important step for optimizing indoor air purity and safety is installing an improved air filtration system. This may call for upgrading replaceable filters in your existing system, or purchasing freestanding, single room units. The most effective filtration method, however, is a permanent high efficiency air filtration system. This uses permanent filters that remove more impurities and invisible particles than replaceable filters, and is often lower maintenance, usually requiring only one cleaning per year. Though more expensive, they are more efficient and over the long run, cost less because of the reduced utility burden.
Installing More Effective Indoor Humidity Control in Your Home
Because long term health problems can result from both too much humidity or too little humidity, it is vital to maintain a healthy amount of moisture in your home environment. The CDC, EPA, and AMA all recommend humidity between 30-50% year round. During winter or in dry climates, lack of humidity can cause sore throats, dry sinuses, and infections. In this situation, your contractor will first seal all air leaks, then install a central humidification system that will maintain a constant, comfortable level of humidity. On the other hand, excessive airborne moisture during summer or in wet climates not only leads to discomfort, but also increases allergens, mold, and dust mites. Indoor toxic mold is an especially serious consequence, and prolonged exposure can cause allergic reactions, toxic reactions, asthma, infections, and respiratory damage. Mold will keep returning unless you identify the source, which could be any organic material, from drywall paper to wood to a food source. If your indoor environment is too humid, all air leaks should be sealed, and an enhanced dehumidification system should be installed, either as a feature on a new higher-powered dehumidifying air conditioning unit or as a ducted dehumidification system.
Solano County Home Carbon Monoxide Tests and Detection Systems
Carbon monoxide leaks, even at a low level, can have lasting health implications, and consumer detection units are less reliable and ill-equipped to detect low level CO leaks. They can come from a variety of sources, such as gas heaters, leaking chimneys and furnaces, gas stoves, automobile exhaust, or old boilers and furnaces. Such leaks are impossible to detect without the proper equipment and can lead to fatigue and chest pain at low levels, and impaired vision, headaches, dizziness, nausea, and death in high concentrations. The typical consumer CO detector only lasts 2-4 years and gradually loses its effectiveness, leaving you vulnerable to undetected leaks. A qualified Solano County air quality contractor will have the equipment to detect and locate even the smallest CO leak, eliminating this prominent home health hazard. Have a trained professional perform an annual inspection of your home to tune-up and clean any central heating systems.
Breathe Safer with Asbestos Removal Services
Asbestos is a naturally occurring mineral that was prevalent in insulation, and in many homes built before the 1970s, asbestos is often found around steam pipes, boilers, furnace ducts. It can also be used in vinyl flooring, roofing, and siding. A common misconception is that the presence of any asbestos poses a health hazard. In fact, the danger of asbestos only arises when it is tampered with or its condition deteriorates, which releases asbestos fibers into the air. Airborne asbestos fibers are known to increase the risk of lung cancer and cause scarring of the lungs. If you suspect your home contains asbestos and you are unsure of the condition of the material, the best thing to do is leave it alone and call an air quality professional who can assess the situation and provide removal services if necessary.
Energy Efficiency: Routine Maintenance and Replacement of Old Home Air Units
Many of the repairs and installations that improve the safety and comfort of your home air environment will also improve your air quality system’s energy efficiency. In addition to these steps, several maintenance procedures can greatly reduce your utility bills. In anticipation of extreme weather, before winter or summer, you might have your climate control unit tuned up. This routine maintenance will ensure that your unit does not break down mid-season, and provides the most efficient climate control service to you.
Your system may need to be cleaned, filters may need to be replaced, the ignition, exhaust, and blower systems should be checked, fan belts should be inspected and adjusted, and all safety sensors should be tested. Another important maintenance step is duct inspection and cleaning. Your ductwork is the delivery system for cooled or heated air, and if it is dirty or blocked, it cannot delivery air efficiently. The ductwork in many homes is plugged with years of built up mold, pet dander, dust, dirt, and airborne debris. Your ducts should be inspected at least every two years for defects and cleanliness, and your entire duct system should be cleaned every 5-7 years, depending on indoor air quality factors such as the age of your home or the presence of pets.
Heating or cooling systems experience wear and tear and reduced effectiveness with age. If your HVAC system has more than 12 years of use, and you don’t intend to sell your home for a few years, a new system may provide a safer, more comfortable and reliable alternative, and can be up to twice as energy efficient, saving you money in the long run.
Request an Infiltrometer Test From a Solano County Air Quality Specialist
As you can see, you have a huge range of air quality system repairs, upgrades, and replacement options at your disposal, and only you can assess which best fits your needs and your budget. A good way to start assessing your options is to request an Infiltrometer test from a local Solano County air quality contractor. This simple, standard test is relatively inexpensive, takes about an hour, and will identify air tightness and circulation problem areas that cause reduced comfort, safety, and efficiency.
Once you obtain the results of your Infiltrometer test, you will know whether the biggest culprits are leaky walls, an oversized heating or air conditioning unit, or poorly functioning ductwork. The licensed contractor can talk you through a range of options for addressing any problems that the Infiltrometer test reveals.
Look for Licensed Air Quality Contractors in Solano County
Be sure to look for Solano County contractors that possess both the necessary experience and contractor’s licenses for the specific type of work you need. All Solano County air quality contractors must be licensed by the California State Contractors License Board. The CSLB offers 43 different license classifications. You can verify a prospective contractor’s current license on the CSLB website.
Licensed Solano County air quality contractors service all the major Solano County cities, including Vallejo, Fairfield, Vacaville, Suisun City, Benicia, Dixon, and Rio Vista and smaller cities like Liberty Farms, Maine Prairie, Mare Island, Nut Tree, Rio Vista, Scandia, Suisun City, and Travis Air Force Base. In addition, you can ask for references from previous customers, which go a long way in providing you the information you need to make the best-informed contractor selection.
Look for Diamond Certified Air Quality Contractors in Solano County
You are the customer. If your goal is to choose a Solano County air quality contractor that will deliver high customer satisfaction and quality, you’ll feel confident in choosing a Diamond Certified air quality contracting company. Each has been rated Highest in Quality in the most accurate ratings process anywhere. And you’re always backed by the Diamond Certified Performance Guarantee.
Obtain Permits If Necessary
Under the California Building Code, no building or structure can be altered, repaired, or improved without obtaining a permit. Codes vary greatly by city and county, so you can find out more about your specific Solano County air quality project on the CSLB website, which details requirements by city and county. In addition, your licensed Solano County air quality contractor can help you identify whether your project requires a permit and how to obtain a permit, if necessary.
Read moreRead less